19
Apr 2020
Alientech Ksuite 3.87
New software update! K-TAG Service Mode: read and write on bench the DENSO ECU mounted on cars and tractors.
Using the K-TAG communication method Service Mode, you can now work also on the Denso and Denso VEA ECUS without the need to open them.
Reading and writing can be made through the direct connection to the ECU connectors. The connection on the bench makes it much easier to read and write the ECUS, thus managing to speed the process up.
THE FIRST IMPLEMENTED VERSIONS, INSTALLED ON HYUNDAI, MAZDA, MITSUBISHI, AND VOLVO VEHICLES ARE:
DENSO P5
DENSO SH0
DENSO SH1
DENSO 275722
DENSO 279700
DENSO VEA MB279700
The DENSO VEA MB279700 ECU, with microcontroller SH72543, that equips the vehicles Volvo EURO6 is now supported in Service Mode. This allows to speed up the ECU patch operations and to enable the functioning of KESSv2 through the OBD port.
In addition to the cars, we also took care of the work vehicles. Through this last update, you will be able to intervene on KUBOTA tractors belonging to the M SERIES, also managed by the DENSO ECU.
You must be logged in to post a comment.