23
Apr 2020
Alientech Ksuite 3.91
MOTOROLA SERVICE MODE: READ, WRITE, AND CLONE THE ECU EDC16 AND MED9 ON THE BENCH.
With the K-TAG communication method Service Mode you can now work on the bench also on the ECUS Bosch EDC16 and MED9, without opening them.
Reading and writing can be made through the direct connection to the ECU connectors, in addition you will also be able to clone the entire content of the ECU.
This last step will allow you to raise the security level and to increase the number of solutions to offer to the customers!
The connection on the bench makes the reading and writing of the ECUS much easier, being able to speed up all the passages.
Through this update the petrol and diesel engines are also supported, not only the latest generations ones, but also the older generations,
in order to let you cover a large number of supported vehicles, thus allowing you to focus both on the repairing and the calibration.
THANKS TO THIS LAST K-SUITE UPDATE, YOU WILL ABLE TO WORK WITH K-TAG IN SERVICE MODE ON THE FOLLOWING ECUS SUPPORTED ON VAG, PSA, VOLVO, AND MERCEDES MODELS:
- Bosch EDC16C34
- Bosch EDC16CP31
- Bosch EDC16CP34
- Bosch EDC16U1
- Bosch EDC16C31
- Bosch MED9.1
- Bosch MED9.5
- Bosch MED9.5.10
You must be logged in to post a comment.