18
Nov 2025
Autotuner – Mercedes Bosch MDG1 MRD1/MRG1 2020+
It’s Mercedes time! We are pleased to announce that this release covers Bosch MD1CP001 (MRD1) and MG1CP002 (MRG1) ECUs found in modern Mercedes models. And the cherry on top? ECU opening is not required for this Remote Unlock. 🚀 How it works: Verify your ECU’s eligibility via BENCH identification. ✅ Ship your ECU to our headquarters for Remote Unlock (without opening it). 📦 We unlock it and return it ready for BENCH & OBD read/write with your AT Tool. 🔓 ⚠️ Important: The ECU will be returned
13
Nov 2025
Autotuner – Bosch EDC16CP39
New AT Protocol! New release for diesel engines from PSA and JLR groups! 🔧 The Bosch EDC16CP39 ECU is now supported with normal reading (NR) via OBD, using your AT Tool. Citroën, Fiat, Lancia, Land Rover, Mitsubishi and even Peugeot… a wide-ranging protocol for vans, SUVs and more. 🚐💨 Stay tuned to discover more upcoming features! 🔥 Key Features ⚙️ Type: Engine Control Unit (ECU) 🔌 Mode: OBDNR 🧩 Readout: Calibration 🖥️ MCU: MPC564 ⏱️ Read time: 1 to 3min ⏱️ Write time: 1min ✅ Checksums correction
06
Nov 2025
Autotuner – Siemens Simos6.2/6.3
New AT Protocol! We continue to expand our portfolio with a new release for Siemens Simos6.2 and Simos6.3 ECUs, now supported via OBD on Audi vehicles. 🚀 This protocol provides Audi V6 enthusiasts with the means to maximize the performance and efficiency of their engines. ⚙️ Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit (ECU) ⚙️ Mode: OBD NR 🔌 Readout: Calibration 🧩 MCU: MPC561 🖥️ Read time: 3min ⏱️ Write time: 1min ⏱️ Checksums correction
30
Oct 2025
Autotuner – Marelli 11MP
New AT Protocol! We are not slowing down with motorcycles, especially when it comes to Aprilia! 🔥 The Marelli 11MP ECU, in its hardware version 11MPHW001, is now supported with virtual reading (VR) via OBD, using your AT Tool. 🔧 This compatibility extends our growing two-wheels support, giving tuners fast access to some of the sharpest bikes from the Italian brand. 🇮🇹 Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit
27
Oct 2025
Autotuner – Bosch MD1CP032/MG1CS024
New AT Protocol! New brand, new challenge: welcome Ineos to the AT universe! 🚙 The Bosch MD1CP032 and MG1CS024 ECUs are now supported in BENCH After Remote Unlock, using your AT Tool, with normal read (NR) and backup available. 🔧 Under the hood of these rugged off-roaders lies BMW power, ready for your finest calibrations. A solid compatibility for vehicles that are not just there for the show. 💪 Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit
20
Oct 2025
Autotuner – ZF 8HP Gen3
New AT Protocol! After supporting post-2020 BMW MDG1 units, it was time to focus on transmissions! 🎯 The ZF 8HP Gen3 TCUs found in BMW and Alpina vehicles are now supported with virtual reading (VR) via OBD, using your AT Tool. 🔧 At last, a complete solution to tune both the engine and the gearbox, perfect for attracting your new clients looking for the latest BMW platforms. 💥 Stay tuned to discover our upcoming new features! 🔥 Key Features Type:
13
Oct 2025
Autotuner – Bosch MDG1 DDE8/DME8 2020+
REMOTE UNLOCK FOR BMW GROUP Yes, you read that right. Things are getting serious for Bosch MDG1 ECUs fitted from 2020 onwards across BMW platforms! 🚀 The DDE8 and DME8 versions, featuring the new Bosch protection, are now supported in BENCH after Remote Unlock, with your AT Tool: MD1CP032 – TC299 MD1CS001 – TC298 MG1CS024 – TC298 MG1CS049 – TC298 MG1CS201 – TC298 To use this service, make sure to verify your ECU’s eligibility by performing a BENCH identification. Once it is verified, you’ll need to ship your ECU to our headquarters for unlocking. The
New AT Protocol! 🏍️ Kawasaki is joining the race! The Denso SH7058 as well as Mitsubishi MH8115F and MH8610F ECUs are now supported with VR reading via OBD, using your AT Tool. 🔧 We are not slowing down on the two-wheel front. 🚀 Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit (ECU) ⚙️ Mode: OBD VR 🔌 Readout: Software + Calibration 🧩 MCUs: RH850, SH7058, SH72531 🖥️ Write time: 2min to 10min ⏱️ Checksums correction ✅ ⚠️ This
02
Oct 2025
Autotuner – Denso RH850/SH7058
New AT Protocol! 🏍️ Work continues on the two-wheel front! The Denso RH850 and SH7058 ECUs found in Yamaha models are now supported with VR reading via OBD, using your AT Tool. 🔧 ⚠️ These protocols require a specific cable depending on the vehicle’s production year: 👉 The Yamaha Euro4 OBD 4 Pin cable for models before 2020 👉 The Motorcycle Euro5 OBD 6 Pin cable for models from 2020 onwards Another compatibility to keep expanding our motorcycle
29
Sep 2025
CMD Flash – 3.2.0.272
NEWS VER 3.2.0.272 OBD Ford – Bosch MD1CS025 FULL OBD (for Ford Transit Connect/Courier,TOURNEO 1.5 ECOBLUE) This new OBD protocol allow you to manage the map and firmware areas of Bosch MD1CS025 ECU. The solution operates directly through the diagnostic port.
