21
Nov 2025
Autotuner – Lotus Emira 2.0 – Bosch MG1CP002
We are proud to announce that this release covers the Bosch MG1CP002 ECU found in the Lotus Emira with the i4 AMG 2.0-liter turbocharged engine. ECU opening is not required for this Remote Unlock. 🚀 How it works: Verify your ECU’s eligibility via BENCH identification. ✅ Order your Remote Unlock and ship us your ECU (without opening it). 📦 We unlock it and return it ready for BENCH read/write with your AT Tool. 🔓 ⚠️ Important: The ECU will be returned to stock. Any previous tuning will
20
Nov 2025
Autotuner – Bosch EDG16C33
New AT Protocol! The Bosch EDG16C33 ECU is now supported in OBD for Mitsubishi and Smart vehicles. 🛠️ We continue to expand our coverage on older vehicles with this new protocol. And to make things even better, it offers virtual reading (VR) and fast writing, a real time-saver on this type of ECU. 🏁 Key Features ⚙️ Type: Engine Control Unit (ECU) 🔌 Mode: OBD VR 🧩 Readout: Calibration 🖥️ MCU: MPC561 ⏱️ Write time: 1min 30sec ✅ Checksums correction Compatibility List*
18
Nov 2025
Autotuner – Mercedes Bosch MDG1 MRD1/MRG1 2020+
It’s Mercedes time! We are pleased to announce that this release covers Bosch MD1CP001 (MRD1) and MG1CP002 (MRG1) ECUs found in modern Mercedes models. And the cherry on top? ECU opening is not required for this Remote Unlock. 🚀 How it works: Verify your ECU’s eligibility via BENCH identification. ✅ Ship your ECU to our headquarters for Remote Unlock (without opening it). 📦 We unlock it and return it ready for BENCH & OBD read/write with your AT Tool. 🔓 ⚠️ Important: The ECU will be returned
13
Nov 2025
Autotuner – Bosch EDC16CP39
New AT Protocol! New release for diesel engines from PSA and JLR groups! 🔧 The Bosch EDC16CP39 ECU is now supported with normal reading (NR) via OBD, using your AT Tool. Citroën, Fiat, Lancia, Land Rover, Mitsubishi and even Peugeot… a wide-ranging protocol for vans, SUVs and more. 🚐💨 Stay tuned to discover more upcoming features! 🔥 Key Features ⚙️ Type: Engine Control Unit (ECU) 🔌 Mode: OBDNR 🧩 Readout: Calibration 🖥️ MCU: MPC564 ⏱️ Read time: 1 to 3min ⏱️ Write time: 1min ✅ Checksums correction
06
Nov 2025
Autotuner – Siemens Simos6.2/6.3
New AT Protocol! We continue to expand our portfolio with a new release for Siemens Simos6.2 and Simos6.3 ECUs, now supported via OBD on Audi vehicles. 🚀 This protocol provides Audi V6 enthusiasts with the means to maximize the performance and efficiency of their engines. ⚙️ Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit (ECU) ⚙️ Mode: OBD NR 🔌 Readout: Calibration 🧩 MCU: MPC561 🖥️ Read time: 3min ⏱️ Write time: 1min ⏱️ Checksums correction
Flex OBD for GM Group Gen2 Delco Exx ECUs OBD Programming with Bench Unlock Supported Vehicles Check all supported vehicles Chevrolet Silverado 2500 HD (GMT1HC) 6.6L Duramax V8 451PS GMC Sierra 1500 (GMT1xx) 3.0L Duramax I6 281PS Opel Astra (K) 1.4L Turbo 150PS Chevrolet Silverado 1500 (GMT1xx) 5.3L Ecotec3 V8 360PS GMC Sierra 3500 HD (GMT1HG) 6.6L V8 407PS This new protocol is available for the following software packages: OBD
30
Oct 2025
Autotuner – Marelli 11MP
New AT Protocol! We are not slowing down with motorcycles, especially when it comes to Aprilia! 🔥 The Marelli 11MP ECU, in its hardware version 11MPHW001, is now supported with virtual reading (VR) via OBD, using your AT Tool. 🔧 This compatibility extends our growing two-wheels support, giving tuners fast access to some of the sharpest bikes from the Italian brand. 🇮🇹 Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit
27
Oct 2025
Autotuner – Bosch MD1CP032/MG1CS024
New AT Protocol! New brand, new challenge: welcome Ineos to the AT universe! 🚙 The Bosch MD1CP032 and MG1CS024 ECUs are now supported in BENCH After Remote Unlock, using your AT Tool, with normal read (NR) and backup available. 🔧 Under the hood of these rugged off-roaders lies BMW power, ready for your finest calibrations. A solid compatibility for vehicles that are not just there for the show. 💪 Stay tuned to discover our upcoming new features! 🔥 Key Features Type: Engine Control Unit
20
Oct 2025
Autotuner – ZF 8HP Gen3
New AT Protocol! After supporting post-2020 BMW MDG1 units, it was time to focus on transmissions! 🎯 The ZF 8HP Gen3 TCUs found in BMW and Alpina vehicles are now supported with virtual reading (VR) via OBD, using your AT Tool. 🔧 At last, a complete solution to tune both the engine and the gearbox, perfect for attracting your new clients looking for the latest BMW platforms. 💥 Stay tuned to discover our upcoming new features! 🔥 Key Features Type:
Flex Bench and Boot Support for DAF Cummins CM1880/CM1881 Flex version 7.36.0.0 is ready Supported Vehicles Check all supported vehicles DongFeng Tianjin 4.7L 180PS DAF XF 106 (II) 10.8L 340PS DAF XF 105 12.9L 510PS This new protocol is available for the following software packages: BENCH/BOOT Bench FLS0.4M – SW Flex Boot Nexus MPC5xxx Master FLS0.4S – SW Flex Boot Nexus MPC5xxx Slave FLS0.5M – SW Flex Full Master FLS0.5S
